X10 Unlock Ready Now

HomeContactSupportSitemap About US News Blog


Phone Us : 0845 643 1606 International 0044 845 643 1606
Phone Finder
  • Instant Unlock Sony Ericsson Xperia X10

    X10 Instant Unlock
    No Waiting For Codes
    All X10 supported
    All Countries & Networks
    Fast X10 Direct Unlock

Instant X10 Unlock Server

Sony Ericsson Xperia X10
Sony Ericsson Xperia X10i
Sony Ericsson Xperia X10a
Docomo SO-01B



SE Xperia X10 Unlock !

Sony Ericsson Xperia X10 Unlock Ready Now
Direct from the developers JIC Technology & Nextgen Servers

Ready Now, X10 Direct Unlock !!
Unlock Your Sony Ericsson Xperia X10 from home, the easy way.. Fast and simple, and all done with the cable as supplied with your phone.
Use our special unlock server and you can unlock the following models easily and safely.
Once unlocked you can use your desired sim card from any network.

Instant Sony Ericsson X10 Direct Unlock, JIC Technology & Nextgen Servers

This is a brand new solution for unlocking the Sony Ericsson Xperia X10, direct unlock in under 1 minute, service is available 24/7 with no restrictions on quantiy. The unlock does not depend on Service Cards.

Supported Phones

  • Sony Ericsson Xperia X10 Mini - E10i
  • Sony Ericsson Xperia X10 Mini Pro - U20
  • Sony Ericsson Xperia X8 - E15i
  • Sony Ericsson Xperia W8 - E16 - E16i
  • Sony Ericsson Xperia X10
  • Sony Ericsson Xperia X10i
  • Sony Ericsson Xperia X10a
  • Docomo SO-01B

Why unlock your X10 with Nextgen Servers

  • you are dealing directly with the developers of this unlock solution, guaranteeing you the best support.
  • Direct Unlock in under 1 minute (total time around 5 to 10 minutes if installing drivers etc)
  • No waiting for unlock codes
  • All countries and networks supported
  • All X10, X10i & X10a supported.

FAQ - Frequently Asked Questions & Answers

Q - Are the Xperia x10 mini Pro & Xperia Mini Pro the same
A - No, the Xperia Mini Pro is a newer Phone, if you are unsure please check the label under the battery, the X10 mini and X10 Mini Pro are both supported (u20 & u20i)

Q - Can I use my existing X10 credits to unlock X10 mini/pro/x8/w8
A - No these require different credits

Q - Is it a permanent unlock
A - Yes

Q - My X10 unlock counter is blocked (from entering an incorrect unlock code too many times)
A - No problem, your X10 can still be unlocked.

Q - If I flash the phone, the phone will get relocked ?
A - No it's a permanent unlock, not a stupid "patch" unlock solution

Buy Credits
1 Credit (unlock 1 Xperia x10) 40 USD
£24.99
10 Credit Reseller Account (unlock 10 Xperia x10) 30 USD per Credit
£180.00
Larger Reseller Accounts
Larger reseller accounts may be purchased by the following methods

  • PayPal Mass Pay (please use the masspay file generator below)
  • Bank Transfer (please contact for details)
  • Western Union (please contact for details)

Xperia X10 Credit Prices

10 Credits 180 GBP 300 USD
50 Credits 780 GBP 1,250 USD
100 Credits 1,320 GBP 2,200 USD
500 Credits 6,200 GBP 10,000 USD
1000 Credits 11,000 GBP 18,000 USD

More Info: Reseller Account Features
For details how to make a PayPal mass pay payment please see: PayPal Mass Payment Guide

Number of X10 Credits
180 GBP
Unlock User Guide

Multi Unlocking Client

X10 Unlock Client

Please make sure:

  • Your X10i is not running ANDROID V1.6 (please update your phone if it is before unlocking, do not attempt to unlock V1.6)
  • Your X10 is running Android 2.1 (as of yet no 2.3 is unreleased so no way to include)
  • You have a Standard non modified Kernal on your phone (you have not flashed custom firmware to your X10)
  • You must have internet connection

Supported Operating Systems

  • Windows XP
  • Windows Vista 32 bit
  • Windows Vista 64 bit
  • Windows 7 32 bit
  • Windows 7 64 bit

Please note there is no MAC OS client or support, or support for running a virtual / parallel machine to use this software.

Toruble Shooting

Error Invalid file:
Possible causes:

1. On Vista or Windows 7 32/64 byte OS, client must be run as administrator (right click on shortcut, select "run as administrator")
2. Firewall or Antivirus is deleting files in the “loaders” folder. Uninstall software turn off antivirus and reinstall.

Phone shows no service after unlock:

1. Remove Battery and wait 1 minute. Insert Battery and power on phone.

Software hangs while unlocking or detecting ADB device

Antivirus has deleted important files. Uninstall software.Turn off Antivirus .Download and install software again


STEP 1: Driver Installation
Before you can unlock your phone you must install SEMC flash drivers & ADB drivers, this sounds complicated but is in fact a very simple process.

Make sure you have installed the Multi Unlock Client, then follow this procedure (see the video for further guidance)

  1. Go to START > ALL PROGRAMS > MULTI UNLOCK CLIENT > X10 DRIVERS
  2. Select the correct 32 bit or 64 bit shortcut folder for your Operating System
  3. First run "SEMC Flash Driver Install"
  4. Complete the install wizard that appears
  5. Second run "ADB Driver Install"
  6. Complete the install wizard that appears
  7. Next we need to connect the X10 in Flash Mode (some times called boot mode)
  8. Remove the battery for 10 seconds and replace
  9. With the phone still powered off, Press & HOLD the "Back Button"
  10. Still holding the Back Button connect the USB cable
  11. Windows will now detect the new hardware and automatically install the drivers.
  12. Once complete, remove the USB cable from the phone and power the phone on.
  13. Next we will connect the phone with "USB Debugging" Enabled
  14. On the phone go to "Settings"
  15. Next go to "Applications"
  16. Next go to "Development"
  17. Now enable "USB Debugging"
  18. Click "OK" to confirm enabling of USB Debugging
  19. Now connect the USB cable
  20. Windows will now detect the new hardware and automatically install the drivers.
  21. Once complete you can proceed to unlock your X10

Watch X10 Driver Install Video Guide

STEP 2: Unlocking your X10i
Please follow this 1 step at a time.

First you must open the unlock client and enter your USERNAME and PASSWORD

  1. Go to START > ALL PROGRAMS > MULTI UNLOCK CLIENT
  2. If you are using WINDOWS VISTA or WINDOWS 7 right click on "Unlock Client" the software and select "Run as administrator"
  3. Windows XP, double click "Unlock Client"
  4. Under the settings tab, Enter your LOGIN/USER NAME and your PASSWORD
  5. Click "Save Login Data"

Now we can proceed to Unlocking the X10

  1. Now click on the "SE" tab of the software
  2. Make sure that your phone is running a later version of ANDROID that 1.6 (tick the box to confirm on the Unlock Client) or ....
  3. If you are unsure if your phone is running v2.1 or later, then connect the phone in USB Debugging Mode & click "Check Phone"
  4. Ok, we now know we are running ANDROID 2.1 or above (if you are not then please upgrade your phone and start again)
  5. Remove your phones battery for 10 seconds and replace
  6. Press and HOLD the phones back button
  7. While still holding the phones back button connect the USB cable.
  8. The unlock client will now start the unlock process
  9. When prompted by the UNLOCK CLIENT, remove the USB cable and power on the phone.
  10. Make sure the phone is in USB Debugging Mode and connect the USB Cable again
  11. The UNLOCK CLIENT will now complete the unlock

Watch X10i Unlock Video Guide

Reseller Acount Features

Reseller accounts come with a web based control panel for you to manage your account,

Web Based Control Panel Features

Genereic website for istructions to give to your customers

  • http://www.x10unlocked.com
  • Full upto date instructions (no out of date PDFs)
  • Instructional Videos
  • Client SW install download (insuring latest version of sw available to your customers)
  • Upto date FAQs to help support your customers

 

 

 

More information about ordering and unlocking.
If you need help with ordering, please read our frequently-asked questions, or feel free to contact us.

There are 75 visitors online


We receive: